Skip to main content

Specifications

Product Specification Sheet

The EwingVTX is a high-power analog video transmitter designed for professional UAS and long-range FPV systems. It offers flexible power settings, wide voltage support, Tramp control compatibility, and extensive channel selection for integrator-level applications.


📡 RF & Channel Specifications

SpecificationDetails
Channels80 CH
Frequency Range4.9 GHz – 6.0 GHz
Power Output LevelsPIT / 25 mW / 200 mW / 500 mW / 1.5 W / 2.5 W (max)
Control InterfacesLocal push-button, Tramp control
Protocol SupportTramp (via flight controller UART)
Antenna ConnectorMMCX

⚡ Electrical Specifications

SpecificationDetails
Input Voltage9 V – 36 V DC
Regulated Output5 V DC
Typical Current Draw~1.2 A @ 9 V (varies by power level)
PIT / Low-Power ModeSupported

🧰 Mechanical & Physical

SpecificationDetails
Weight~13 g
Dimensions~36 mm × 27.5 mm × 8 mm
Mounting Pattern20 × 20 mm, M2
RF Connector TypeMMCX

🔧 Functional Features

FeatureDescription
Multi-Channel Operation80-channel analog video transmission
Power ScalingSelectable output power from PIT to 2.5 W
Remote ConfigurationTramp protocol support via flight controller
PIT ModeLow-power operation for bench testing and staging
Thermal DesignIntended for active airflow during high-power operation

📦 Package Contents

ItemDescription
Video TransmitterEwingVTX module
Power / Control HarnessPre-terminated integration cable
Mounting HardwareCompatible with 20 × 20 mm stack systems

⚠️ Integration Notes

  • Some flight-control firmware may support fewer than 80 channels; verify channel mapping during configuration.
  • High-power operation requires adequate airflow for thermal management.
  • Antenna is not included and must be selected to match frequency band and power level.
  • Operation must comply with applicable RF regulations and authorization requirements.

Specifications subject to change as part of continuous improvement and validation testing.

© Ewing Aerospace. All rights reserved.